Stair Treads > Rubber Design Stair Treads >
COVED STAIR RISER No. 505CR
Complete the job by specifying coved risers. Allows easier cleaning, is more attractive, reduces fitting procedures at rear of steps. 5/8" toe fits flush on top of treads. Can be trimmed to fit in height and length; cuts labor costs. Install with Musson No. 400 Neoprene Contact Cement, No. 300 Water-based Contact Adhesive or No. 560 Rubber Flooring Adhesive.
SPECIFICATIONS:
Furnish and install Musson #505CR Molded Covered Stair Riser, 1/8" thick, 7" high, with 5/8" toe; standard lengths as needed: 36", 42", 48", 54", 60" or 72"; Select standard color from Color Series I, Color Series II or Color Series III.
Primary Color Series
Available in the following items only: 500L, 750, 250, 250VI and 505CR
Color Series I
All colors must be selected from actual samples
Color Series II
All colors must be selected from actual samples
Color Series III
All colors must be selected from actual samples
*non-standard colors which may require a minimun quantity run.