Stair Treads > Adhesives No. 400, No. 300 and No. 110
No. 400 Neoprene Contact Adhesive
For bonding to all Disc-O-Treds, Rubber Stair Treads or Koroseal Vinyl Stair Treads to concrete, pan filled, wood, metal, marble and terrazzo steps. A rapid drying, long range contact cement; specially formulated for Musson stair coverings. Brush on application; use on back of treads and back of nosing. Contains solvents, extremely flammable. 1 gallon covers 75 lineal feet of stair treads (brush on back of tread and step). Ready to use in 1 quart, 1 gallon and 4 gallon containers.
No. 300 Water-Based Contact Adhesive
A non-solvent based alternative to install rubber and vinyl stair treads and cove risers to concrete, wood, terrazzo, metal or marble. One gallon covers 75 lineal feet of stair treads (brush on back of tread and step). Ready to use in 1 quart, 1 gallon and 4 gallon containers.
Stair Treads >
No. 110 Epoxy Stair Nose Caulk
Environmentally Friendly
Epoxy Stair Nose Caulk is recommended for all Stair Tread installations; Nose Caulk is necessary when installing Adjusta-Nose treads or when the step nosing is broken, worn or rounded. This two-part Epoxy Caulk will fill voids at the nsoe of the step and give needed support underneath the stair tread nose. Nose Caulk can also be used to repair the top surface of the step. Two-part mixture in quart units (mixing instructions on label) or in 13.5 oz. Dual-Cartridge, for use with our professional Dual-Cartridge Dispenser. Dual-Cartridge saves time, labor, mess and cleanup as caulk mixes in nozzle as it is dispensed. Dual-Cartridge yields approx. 50 lin. ft. of 1/4" bead; quart unit yields approximately 75 ft.