Musson Rubber Company
Mats & Matting

Mats & Matting > Entrance Mats >

Vinyl Back Cocoa Mats

Ideal for use in our recess frames. For 10mm or 17mm mat, specify Position "A", "B", "C", or "H". For 30mm mat, specify Position "H", reverse cut; make recess 1" deep. Black Vinyl beveled Nosing can be attached to any or all edges for surface use.

Vinyl-Back Cocoa Mats in Natural Golden Tan color provides safe leak proof brush action cleaning. All natural fibers from the outer husk of the coconut are fused into a vinyl backing by a unique process to create an extremely long wearing and efficient shoe cleaning surface.The vinyl-back allows trimming to fit any size or shape entrance; is skid proof, lays flat, stays in place. Tan color is colorfast. Ideal for use in recesses; cropped bris- tles give excellent scraping action.These mats clean grit and moisture from shoes, dry rapidly; won't mildew or rot. Mats do not generate static electric- ity. Mats can be easily vacuumed or washed with mild soap. Meets Department of Commerce Flammability Specs. DOC-FF-1-70; classified as a "B" rating under Test ASTM-E84-80. Satisfactory for golf-shoe traffic.

SPECIFICATIONS:

Furnish and install Musson Vinyl-Back Cocoa Mats, natural Golden Tan color; mats shall be 10mm (approx. 3/8") thick; or 17mm (approx. 11/16") thick; or 30mm (approx. 1-3/16") thick; custom-made to size and shape to fit areas detailed on drawings. Mats shall meet DOC Flammability Spec. (DOC-FF- 1-70) and shall not generate static electricity. Custom made mats shall be _____ wide by _____ long (maximum size is 6'6" wide x 41' long in one piece).

Stock sizes available in 17mm thickness only.

Road Roller Matting

Road Roller MattingRoad roller mats are made with fibers from the almost indestructible outer husk of the coconut. These fibers are bonded into a vinyl backing. These vinyl back Musson Road Roller Mats can be installed much easier than woven mats and can be easily cut to fit without the mat unraveling. If small holes are needed for installation, a sharp knife or punch will easily do the job.

Stock No. Std. Roll Size Std. Ctn. Pack Std Ctn. Weight
RR 4R 4" x 32'-9" 2 rolls 43 lbs.
RR 6R 6" x 32'-9" 1 roll 33 lbs.
RR 8R 8" x 32'-9" 1 roll 43 lbs.
RR 9R 9" x 32'-9" 1 roll 49 lbs.
RR 10R 10" x 32'-9" 1 roll 54 lbs.
RR 12R 12" x 32'-9" 1 roll 67 lbs.

 

Request a quote on this product.